Cleverly combined
All three series of the TKX family (TKP,TKE and TKM) combine an identical outer geometry of the aluminum base body with the same number of mounting surfaces for transmission modules and other add-on elements. The TKX family offers you the greatest possible flexibility in configuration. Depending on the size, from two to nine mounting surfaces are available on each tool changer. You can select the entire portfolio of accessory components and move freely within the modular system, regardless of the drive type selected for the tool changer. It is also possible to exchange tools between different systems with different heads without any problems. Maintenance work, changeover times and storage costs are thus drastically reduced. The internal air feed-throughs with specially developed seals as well as the sensors for piston stroke monitoring and for tool side detection are included as standard in all variants. The only difference is the energy supply: compressed air at 6 bar (TKP), electric current at 24 volt (TKE) or human power via actuation of a push lever (TKM).