-
AS CGS3-40
Pressure starfor CGS3-40 -
AS CGS3-50
Pressure starfor CGS3-50 -
AS CGS3-64
Pressure starfor CGS3-64 -
AS CGS3-80
Pressure starfor CGS3-80 -
AS CGS3-100
Pressure starfor CGS3-100 -
AS CGS3-125
Pressure starfor CGS3-125 -
AS CGS3-160
Pressure starfor CGS3-160 -
AS CGS3-200
Pressure starfor CGS3-200
Pressure stars
Integrated spring element for joining without overloading the robot
Features
• Ideal for loading machine tools
• Retroactively mountable
• Minimizes wear and overload of the robot
Description
The pressure star for the CGS3 series integrates a spring-loaded element for pressing the workpiece directly into the centric gripper. The pressure star is mounted in the center between the three jaws of the gripper. When the workpiece is picked up, the springs are being compressed and held in this position. As soon as the gripper sets the workpiece down again and the jaws open, the pressure star is being pushed out by the springs and presses the workpiece against the stop of the fixture (for example a lathe). This ensures that small shape and position tolerances have no influence on the defined deposit position of the workpiece. Additionally the robot does not have to apply increased pressure forces that could lead to excessive wear or malfunctions.
The pressure star can be retrofitted to the CGS3 gripper, but replacing the wedge hook cover is required. The new cover is included in the scope of delivery of the pressure star.
